Mechanical Design Technology Program Code 106061

Employment Potential

A graduate of this program will have the potential for employment in the following areas:

Detailer: produces detailed drawings of parts of machines from supplied information on CAD, and make drawing changes to comply with Engineering Change Notices (ECN’s)/ Engineering Change Requests (ECR’s).

Mechanical Design Technician: applies knowledge of mechanical engineering technology to design, develop, and test new or revised machinery; assists in component selection and sizing of machine members; has duties split between design and drafting and may specialize in a specific type of machine or product. Most work is performed on a computer.

Mechanical Drafter: has the principal duty of preparing working drawings of machinery and mechanical devices using CAD systems to draft detail and assembly drawings indicating dimensions and tolerances, materials, surface finishes, joining requirements, and other engineering data.

With additional education and/or work experience, graduates may find other opportunities for employment.

. Mechanical Designer (Product Designer)
. Lead Designer
. Project Engineer
. Technical Sales/Service Representative

Program Outcomes

. Draw principal, auxiliary, and sectional views.
. Use mechanical, architectural, metric, and civil scales to plot scalable prints of drawings.
. Research information on the Internet.
. Maintain files on a personal computer.
. Operate word processing and spreadsheet programs.
. Analyze displacement, velocity, and acceleration of machine members.
. Analyze stresses caused by forces acting on bodies at rest.
. Analyze forces acting on bodies at rest.
. Sketch orthographic and isometric views.
. Use catalogs or Internet sites to select standard components in machine design.
. Dimension mechanical drawings according to conventional ANSI Y14 standards and GDT standards.
. Draw weldments and sheetmetal layouts.
. Draw layouts.
. Calculate gear train ratios.
. Create basic models using a parametric modeler.
. Design simple mechanical devices.
. Draw detail and assembly drawings.
. Prepare electrical/electronic documentation for machine control.
. Construct ladder diagrams for motor controls documentation.
. Display attitudes consistent with the profession.
. Work in an organized manner, documenting work performed.
. Use Machinery's Handbook as a reference source.
. Apply various manufacturing methods and techniques as they relate to mechanical design.
. Identify the characteristics of metals, polymerics, ceramics, and composites.
. Evaluate material options for machine components.
. Select materials for machine components.

Requirements for Program Entry

. Completed application.
. High school transcript or equivalent. (For a list of equivalents, please refer to Admissions.)
. Admission assessment or equivalent. (For a list of equivalents, please refer to Assessment.)
. Students will be required to take the Accuplacer College Level Math assessment instead of the Algebra assessment. The benchmark grade for Mechanical Design Technology on the College Math assessment is 50.
. A high school background in mathematics, science and industrial education.
. High school algebra or equivalent.
. The student will either provide proof of having completed course work in Windows, Word, and Excel or pass a proficiency test.

Curriculum
The Mechanical Design Technology Associate Degree is a two-year program. Upon graduation, a student will have completed 68 credits.

FIRST SEMESTER
10-606-111 Mechanical Design-Exploring 1
10-606-113 CAD 2
10-606-157 Solidworks Fund and Drawings 2
10-614-113 2D Essentials 2
10-801-196 Oral/Interpersonal Comm 3
10-804-118 Interm Algebra w Apps 4
10-809-199 Psychology Of Human Relations 3
SEMESTER TOTAL 17

SECOND SEMESTER
10-442-153 Prototype Metal Fabrication 2
10-606-103 2D CAD - Advanced 3
10-606-122 CAD-Fabrication & Assembly 2
10-606-126 Geometric Dimension/Toleran 2
10-804-196 Trigonometry w Apps 3
10-806-154 General Physics 1 4
SEMESTER TOTAL 16

THIRD SEMESTER
10-420-115 CNC-MECHANICAL DESIGN 3
10-606-135 Machine Members-Strength 5
10-606-139 CAD-Electrical Control 3
10-606-158 Solidworks Advanced 3
10-606-159 Materials Science 3
SEMESTER TOTAL 17

FOURTH SEMESTER
10-606-141 Design Problems 3
10-606-143 Mechanisms 3
10-620-100 Fluids 1: Basic Pneumatics 1
10-620-101 Fluids 2: Basic Hydraulics 1
10-620-165 Fluids 3: Inter Hydraulics 1
10-801-195 Written Communication 3
10-809-172 Race Ethnic & Diversity 3
Elective 3
SEMESTER TOTAL 18

TOTAL CREDITS 68

Suggested Electives
10-660-104, DC 1: Introduction
10-660-105, DC 2: Circuits
10-660-107, AC 1: Properties

COURSE DESCRIPTIONS

These courses provide an opportunity for students to develop the knowledge, skills, and understanding required for employment in this field.

10-420-115 CNC-MECHANICAL DESIGN...2 axis CNC; 3 axis CNC; importing files; mold making. (Prerequisites: 10-606-113, CAD; 10-606-157, Solidworks Fund and Drawings)

10-442-153 PROTOTYPE METAL FABRICATION...ferrous and non-ferrous metals, oxyacetylene gas, tungston arc, gas metal arc, and metal fabrication. (Corequisite: 10-606-122, CAD Fab & Assembly; OR 10-614-122, Prototype Design)

10-606-103 2D CAD-ADVANCED ...primary and successive auxiliary views; intersections and developments; intersections of planes and dihedral angles; piercing points; angles between lines and planes; revolutions; vectors. (Prerequisite: 10-606-113, CAD)

10-606-111 MECHANICAL DESIGN EXPLORING ...philosophy/organization/procedure of the Mechanical Design Technology Program, brief overview of the engineering profession by involvement in a design project to illustrate basic concepts/methods of machine design. (Prerequisite: Accepted into the Mechanical Design Technology program)

10-606-113 CAD (COMPUTER AIDED DRAFTING) ...computer aided drafting using AutoCAD software focusing on template settings; creating and manipulating layers; basic drawing, editing, and inquiry commands; blocks and attributes; and plotting. (Corequisite: 10-607-119, Civil Drafting Technology OR 10-606-119, Technical Sketching OR 10-614-113, 2D Essentials)

10-606-122 CAD-FABRICATION & ASSEMBLY ...sheet metal drawings as applied to brackets, enclosures & guarding; welding drawings; threads & fasteners; stock components; working drawing documentation. (Prerequisite: 10-606-113, CAD)

10-606-126 GEOMETRIC DIMENSIONING/TOLERANCING ...review of standard dimensioning, datums, material condition symbols, tolerances of form and profile, tolerances of orientation and run out, location tolerances and virtual condition. (Prerequisite: 10-606-113, CAD; OR 10-606-157, Solidworks Fund and Drawings OR 10-606-162, Solidworks Fundamentals)

10-606-135 MACHINE MEMBERS-STRENGTH ...force analysis, moments, truss and frame analysis, simple stress, properties of materials, joint design, centroids and moments of inertia, beam design, shafting design, combined stresses, columns. (Prerequisites: 10-806-154, General Physics 1; 10-804-196, Trigonometry w Apps)

10-606-139 CAD-ELECTRICAL CONTROL ...draw block and flow diagrams, logic diagrams; introduction to programmable control; fundamentals of electronics; motors and control circuits; sheet metal chassis and panel drawings. (Prerequisite: 10-606-113, CAD)

10-606-141 DESIGN PROBLEMS ...data gathering, mathematics, document standard practices, project management and teamwork.. (Prerequisites: 10-606-126, Geometric Dimensioning/Tol; 10-606-135, Machine Members-Strength; 10-606-103, 2D CAD Adv, 10-606-158, Solidworks Adv.)

10-606-143 MECHANISMS ...study of motion, vector equations and sense notation, basic motion concepts, kinematic drawing and displacement, velocities in mechanisms, accelerations in mechanisms, CAM motions, and gear trains. (Prerequisites: 10-806-154, General Physics 1; 10-606-113, CAD; 10-804-196, Trigonometry w Apps)

10-606-157 SOLIDWORKS FUNDAMENTALS AND DRAWINGS ...terminology, software operation and interface basics, creating basic models, creating casting and forging models, revolved features, Solidworks drawing environment and fully dimensioned orthographic drawings. (Corequisite: 10-606-119, Sketching-Technical, OR 10-614-113, 2D Essentials Sketching-Technical; Prerequisite: Familiarity with Windows file management)

10-606-158 SOLIDWORKS ADVANCED ...sweeps, equations, configurations, draft, base and derived parts, assemblies, assembly drawings, auxiliary, section and special views, sheet metal, lofting, surfacing, and core and cavity. (Prerequisite: 10-606-157, Solidworks Fund and Drawings OR 10-606-163, Solidworks-Intermediate)

10-606-159 MATERIALS SCIENCE ...engineering materials, material selection, the relationship between material structure and properties, and failure analysis for design improvement. Materials covered include; metallic, polymeric, ceramic, and composite/exotic.

10-614-113 2D ESSENTIALS ... an introduction to technical communication, annotation, geometric construction, model, orthographic and pictorial, section and auxiliary views and dimensioning. Knowledge integral to Model Building.

10-620-100 FLUIDS 1: BASIC PNEUMATICS ...what fluid power is, differentiate between hydraulics and pneumatics, implement basic pneumatic circuits, utilize schematics, apply Pascal's law, define properties of fluids, implement airflow control and hydraulics cylinder circuits.

10-620-101 FLUIDS 2: BASIC HYDRAULICS ...hydraulic pumps, basic hydraulics actuator circuits, hydraulic schematics, apply Pascal's Law, summarize the effects of fluids friction, define properties of hydraulic energy, design hydraulic circuits with directional control valves. (Corequisite: 10-620-100, Fluids 1: Basic Pneumatics)

10-620-165 FLUIDS 3: INTERMEDIATE HYDRAULICS ...design of cylinder actuating circuits with pressure-compensated flow control valves, how to control pressure, pilot-operated check valve applications, accumulator operation and application, hydraulic motor types and applications. (Prerequisite: 10-620-101, Fluids 2: Basic Hydraulics)

10-801-196 ORAL/INTERPERSONAL COMMUNICATION ...the communication process, perception and self-concept, language, listening, nonverbal communication, interpersonal relationships, communication in groups and public communication; prepare and deliver an oral presentation. 3 cr.

10-804-118 INTERM ALGEBRA WITH APPLICATIONS ...Algebra content with applications. Topics include properties of real numbers, order of operations, algebraic solution for linear equations and inequalities, operations with polynomial and rational expressions, operations with rational exponents and radicals, algebra of inverse, logarithmic and exponential functions. (Prerequisites: Recommendation: Accuplacer Algebra Test = 61 OR Accuplacer (College Level Math) = 40 OR Completion of 10-804-110, Elementary Algebra w Apps OR 10-804-120, Math-Tech Algebra with grade "C" or better). 4 cr.

10-809-199 PSYCHOLOGY OF HUMAN RELATIONS ...decision making, motivation, conflict resolution, learning strategies, growth and adjustment, diversity, psychological theories, relationships, psychological disorders, stress, career analysis, social psychology, and lifespan development. 3 cr.

10-804-196 TRIGONOMETRY WITH APPLICATIONS ...topics include circular functions, graphing of trigonometry functions, identities, equations, trigonometric functions of angles, inverse functions, solutions of triangles complex numbers, DeMoivre's Theorem, polar coordinates, and vectors. (Prerequisites: Recommendation: Accuplacer (College Level Math) = 63 OR Completion of 10-804-118, Intermediate Algebra w Apps; 10-804-195, College Algebra with Apps or 10-804-131, Math-Algebra/Inter with grade "C" or better OR Concurrent enrollment in 10-804-195, College Algebra with Apps) 3 cr.

10-806-154 GENERAL PHYSICS 1 ...applications/theory of basic physics principles: problem-solving, laboratory investigation, and applications including unit conversion and analysis, vectors, translational and rotational kinematics/dynamics, heat/temperature, and harmonic motion and waves. (Prerequisite: Recommendation: 10-804-118, Intermediate Algebra with Apps with a grade of "C" or better) 4 cr.

10-801-195 WRITTEN COMMUNICATION ...The nature and scope of academic and business writing. Develops writing skills which include pre-writing, drafting, revising, and editing. A variety of writing assignments are designed to help the learner analyze audience and purpose, research and organize ideas, and format and design documents based on subject matter and content. Also develops critical reading and thinking skills through the analysis of a variety of written documents. 3 cr.

10-809-172 RACE ETHNIC & DIVERSITY ...basic American values of justice and equality by teaching vocabulary, history of immigration/conquest, transcultural communication, legal liability, multicultural majority/minority relations, ageism, sexism, gender, sexual orientation, the disabled/ADA. (Prerequisite: Recommendation: Completion of 10-809-196, Introduction to Sociology or 10-809-197, Contemporary American Society prior to this course) 3 cr.